Concrete is tough. Rebar is everywhere. And your excavator can only do so much with one attachment. That was the reality for one of our customers in Ohio. He runs a demolition company. He found us online while searching for an excavator breaker hammer for sale. He ended up buying both a breaker hammer and an excavator eagle shear. The combination changed his business. If you are comparing excavator rock hammer options or looking for a reliable concrete breaker for an excavator, this story will help you understand the real value of the right attachment combination. Do you have a similar situation? Contact YG at +8613937183205.
Lock In Today’s Factory Price – Request a Quote Now
What Was the Problem for This US Demolition Contractor?
The customer is based in Columbus, Ohio. He runs a demolition company. His core business is commercial and industrial demolition. He tears down old factories, warehouses, bridges, and parking structures. He also does concrete recycling and scrap processing.
His problem was simple. He was winning more contracts, but his old breaker hammer was too small and too slow. He had a 35-ton excavator, but his old breaker was undersized. It took forever to break concrete. The rebar was a nightmare. He had to use a torch to cut it, which was slow, dangerous, and expensive.
He told us: “I was spending too much time on rebar. My breaker was too small. My workers were exhausted. I needed a better solution.”
Why Did He Start Looking for a Breaker Hammer?
The customer faced several serious problems.
- His old breaker was too small. It was a 1000 kg class hammer. It could not break reinforced concrete efficiently.
- Rebar was slowing him down. After breaking the concrete, he had to cut the rebar with a torch. This took hours. It was dangerous. It was expensive.
- Labor costs were rising. He needed more workers to handle the rebar. Wages in Ohio are not low.
- Project deadlines were tight. General contractors wanted faster turnaround. He was falling behind.
- He was losing bids. Competitors with better equipment could promise faster, cheaper demolition. He could not compete.
- He wanted one machine to do more. He did not want to buy two separate excavators. He wanted attachments that could swap quickly.
He started searching online for an excavator rock hammer. He found many options. But he needed a hammer that matched his 35-ton excavator. That’s when he found the YG Machinery website.
Lock In Today’s Factory Price – Request a Quote Now
Why Did He Contact YG and What Did We Initially Recommend?
He contacted us through our website. He told us his excavator size and his project needs. He wanted a breaker hammer for reinforced concrete demolition.
YG Excavator Breaker Hammer Parameters
| Model | ChiselDiameter | SuitableCarrierWeight | Main bodyWeight | OperatingPressure | Hydraulic Oil Flow | Blow Frequency | HoseDiameter |
| mm | Ton | kg | Kg/cm 2 | I/min | bpm | inch | |
| YG350 | 35 | 0.5-1 | 40 | 90-120 | 15-25 | 800-1300 | 1/2 |
| YG400 | 40 | 1-3 | 53 | 90-120 | 15-25 | 800-1300 | 1/2 |
| YG450 | 45 | 1.2-3.0 | 67 | 90-120 | 20-30 | 700-1200 | 1/2 |
| YG530 | 53 | 2.5-4.5 | 85 | 90-120 | 25-50 | 600-1100 | 1/2 |
| YG600 | 60 | 2-5 | 140 | 90-120 | 25-50 | 600-1100 | 1/2 |
| YG680 | 68 | 4-7 | 152 | 110-140 | 40-70 | 500-900 | 1/2 |
| YG750 | 75 | 6-9 | 210 | 120-150 | 50-90 | 400-800 | 1/2 |
| YG850 | 85 | 7-14 | 278 | 130-160 | 60-100 | 400-800 | 3/4 |
| YG1000 | 100 | 10-15 | 475 | 150-170 | 80-110 | 350-700 | 3/4 |
| YG1250 | 125 | 15-18 | 616 | 150-170 | 80-110 | 350-700 | 3/4 |
| YG1350 | 135 | 16-26 | 846 | 160-180 | 130-150 | 400-800 | 1 |
| YG1400 | 140 | 18-26 | 916 | 160-180 | 120-180 | 350-500 | 1 |
| YG1400A | 140 | 18-26 | 952 | 160-180 | 120-180 | 350-500 | 1 |
| YG1500 | 150 | 27-35 | 1088 | 160-180 | 150-190 | 350-700 | 1 |
| YG1550 | 155 | 28-36 | 1309 | 180-200 | 200-260 | 250-400 | 1-1/4 |
| YG1650 | 165 | 30-40 | 1438 | 180-200 | 200-260 | 250-400 | 1-1/4 |
| YG1650P | 165 | 30-40 | 1586 | 180-200 | 200-260 | 250-380 | 1-1/4 |
| YG1750 | 175 | 35-40 | 1929 | 180-200 | 210-290 | 200-350 | 1-1/4 |
| YG1850 | 185 | 35-45 | 2411 | 190-220 | 220-270 | 200-250 | 1-1/4 |
| YG1990 | 190 | 40-55 | 2626 | 190-220 | 220-290 | 180-200 | 1-1/4 |
| YG2100 | 210 | 60-80 | 3396 | 200-240 | 290-350 | 150-200 | 1-1/4 |
We initially recommended the YG1650 Excavator Breaker Hammer. Here is why:
| Parameter | YG1650 Specification | Why It Fits His Needs |
|---|---|---|
| Chisel Diameter | 165 mm | Strong enough for reinforced concrete |
| Suitable Carrier Weight | 30–40 Ton | Matches his 35-ton excavator |
| Main Body Weight | 1438 kg | Heavy enough for serious breaking |
| Operating Pressure | 180–200 Kg/cm² | Standard for his excavator |
| Hydraulic Oil Flow | 200–260 l/min | Within his excavator’s range |
| Blow Frequency | 250–400 bpm | Good balance of power and speed |
| Hose Diameter | 1-1/4 inch | Standard size, easy to source |
The YG1650 is a powerful hydraulic hammer for excavator. It has a 165 mm chisel. It is designed for 30–40 ton carriers. It runs at 180–200 Kg/cm² pressure. It has a flow rate of 200–260 l/min. It hits 250–400 times per minute. It uses a 1-1/4 inch hose.
We told him: “This hammer will break your concrete fast. It will handle the rebar. It will fit your excavator.”
Lock In Today’s Factory Price – Request a Quote Now
What Did He Worry About Before Buying a YG Excavator Breaker Hammer?
The customer had real concerns. We answered every one.
- Worry 1: “Will it fit my excavator?”
We asked for his excavator model, hydraulic flow, and operating pressure. The YG1650 matched perfectly. We sent him the specifications and a compatibility chart. - Worry 2: “Will it break reinforced concrete?”
We sent him videos of the YG1650 breaking reinforced concrete. We showed him the chisel penetrating rebar. He was impressed. - Worry 3: “What about rebar?”
This was his biggest concern. He said: “The breaker breaks the concrete, but the rebar stays. I still have to cut it.” We listened. And we gave him a better answer. - Worry 4: “Is the price too high?”
We broke down the cost. We showed him the savings from faster breaking, less labor, and fewer torch cuts. We calculated the payback period. He saw the value. - Worry 5: “What about spare parts and service?”
We shipped a spare parts kit with the machine, including chisels, seals, and hoses. We told him we can send parts within 48 hours. - Worry 6: “What if it breaks down during a project?”
We offered a 12-month warranty and remote technical support. We told him: “If you have a problem, call us. We will help you fix it.”
Lock In Today’s Factory Price – Request a Quote Now
What Was the Better Solution? The Breaker Hammer + Eagle Shear
After several conversations, we realized something important. The customer did not just need a breaker hammer. He needed a complete demolition solution. The breaker would break the concrete. But the rebar would still be there. He needed a way to cut and process the rebar quickly.
That’s when we recommended the YG-2977 excavator eagle shear.
Here is why:
| Parameter | YG-2977 Specification | Why It Fits His Needs |
|---|---|---|
| Weight | 2977 kg | Matches his 35-ton excavator |
| Max Open Size | 660 mm | Could grab large concrete pieces |
| Width | 1600 mm | Wide enough for rebar bundles |
| Height | 2600 mm | Good reach and leverage |
| Effective Shear Depth | 578 mm | Can cut thick rebar |
| Rotating Way | 360 hydraulic | Easy to position |
| Working Pressure | 320 Bar | Within his excavator’s range |
| Bottom Shear Force | 330.2 T | Massive cutting power |
| Medium Shear Force | 189.2 T | Strong enough for rebar |
| Tip Shear Force | 127.2 T | Precise cutting at the tip |
| Applied Excavator Weight | 28–35 T | Perfect match for his 35-ton machine |
The YG-2977 excavator eagle shear is designed for waste scrap and rebar processing. It has a 360-degree hydraulic rotation. It has a maximum opening size of 660 mm. It has an effective shear depth of 578 mm. It produces 330.2 tons of bottom shear force. It is designed for 28–35 ton excavators.
We explained the workflow. The breaker breaks the concrete. The shear cuts the rebar and processes the scrap. The customer could use one excavator with two attachments. He could swap them in minutes. This would save him time, labor, and money.
He was convinced. He ordered both the YG1650 breaker hammer and the YG-2977 eagle shear.
Lock In Today’s Factory Price – Request a Quote Now
What Were the Unexpected Effects After Using Them?
He thought he was just buying a bigger hammer. He got a complete demolition system.
- Concrete breaking speed increased by 50%. The YG1650 broke reinforced concrete faster than his old hammer. Projects that took 10 days now take 5 days.
- Rebar processing time dropped by 70%. The YG-2977 shear cut rebar in seconds. He stopped using torches. He stopped spending money on gas and labor.
- Labor reduced from 6 workers to 3. He needed fewer people for rebar cutting and scrap processing. The shear did the work.
- Scrap value increased by 25%. The shear cut rebar into cleaner, more uniform pieces. Scrap yards paid more for the processed material.
- Torch costs dropped to zero. He stopped buying gas and replacement tips. He stopped paying for torch operators.
- He won two new contracts. Because he could promise faster, cleaner demolition, he won contracts in two new cities.
- Project cost per ton dropped by 35%. Faster speed, fewer workers, and higher scrap value brought the cost down.
- The machines paid for themselves in 8 months. With savings and new contracts, the payback was faster than expected.
- He avoided a major safety incident. His team was cutting rebar with a torch. The torch ignited nearby debris. No one was hurt, but it was a close call. After switching to the shear, the fire risk was eliminated.
He told us: “I didn’t expect the shear to be so fast. I didn’t expect the scrap value to go up. This combination changed my business.”
Lock In Today’s Factory Price – Request a Quote Now
What Did the Customer Say After He Used Excavator Breaker Hammer+Excavator Eagle Shear?
We asked him what he would say to other US demolition contractors. He said:
“If you are still using a small breaker and a torch, you are losing money. The breaker breaks the concrete. The shear cuts the rebar. Together, they do everything. I looked at other brands, but the YG1650 Excavator Breaker Hammer and YG-2977 Excavator Eagle Shear had the right power and the right price. The team helped me with training, spare parts, and setup. I should have bought them two years ago.”
He also said: “The machines are strong. They run every day. My operators like them. I am now thinking about buying a second shear for my other excavator.”
Are You Facing the Same Problems? Contact YG For Customized Services
If you are a demolition contractor, a scrap processor, or a concrete recycling company, you may have the same challenges. Small breakers are too slow. Torch cutting is too dangerous. Labor costs are rising. A hydraulic hammer for excavator combined with an excavator eagle shear can help you finish faster, reduce labor, and increase scrap value.
The YG series includes excavator breaker hammers from YG350 to YG2100. They cover carrier weights from 0.5 tons to 80 tons. They have chisel diameters from 35 mm to 210 mm. They run on standard hydraulic systems. They are built for tough conditions.
The YG series also includes excavator eagle shears from YG-620 to YG-4052. They cover excavator weights from 5 tons to 50 tons. They have shear forces from 81.2 tons to 387.2 tons. They rotate 360 degrees. They are designed for rebar, scrap, and concrete processing.
If you have a similar project—reinforced concrete demolition, bridge removal, factory teardown, or scrap processing—contact us. We’ll help you choose the right excavator breaker hammer for sale and the right eagle shear for your excavator. We’ll give you a clear price, a training plan, and a delivery schedule.
